MIL-B-80272
and fully
furnished as
specified
shall be
tional equipment required
described (see 6.2.1).
3.12 Optional equipment. Optional equipment shall be furnished as speci-
fied and shall be fully described (see 6.2.1).
Such repair parts as are specified (see 6.2.1) shall
3.13 Repair parts.
be furnished.
3.14 Marking of instruction plates, indicating plates and name plates.
All words on instruction plates, indicating plates and name plates shall be
in the English language. Characters shall be engraved, etched, embossed or
stamped in boldface on a contrasting background. When these methods are not
practicable, the instructions shall be applied directly on the item by
environmentally protected decalcomania transfer, metal wraparound tag,
stencil, silk screen or by any other method suitable for the use intended
which shall be as permanent as the normal life expectancy of the item to
which it is applied and capable of withstanding the environmental tests and
cleaning procedures specified for the item.
3.14.1
Lubrication chart or plate.
Unless otherwise specified (see
6.2.1), a lubrication chart or plate shall be permanently and securely
attached to each machine. If a chart is furnished, it shall be placed in a
transparent plastic folder, or permanently sealed between clear plastic
The chart or plate shall contain
sheets with suitable means of mounting.
the following information:
Points of lubricant application
Servicing internal
Type of lubricant
Viscosity
Unless otherwise specified (see 6.2.1), a nameplate
3.14.2 Nameplate.
shall be securely attached to each machine and contain the information
If the machine is a special model, the model designation
listed below.
shall include the model of the basic standard machine and a suffix iden-
tified in the manufacturer's permanent records. The captions listed may be
shortened or abbreviated, provided the entry for each caption is clear as to
its identity.
Manufacturer's name
Manufacturer's model designation
Manufacturer's serial number
Power input (volts, total amps, phase, frequency)
Contract Number or Order Number
National Stock Number or Plant Equipment Code
Date of manufacture
Unless otherwise specified (see 6.2.1) the machine
3.15 Hour meter.
shall be equipped with an hour meter. The hour meter shall be installed to
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business